Distribution Fault Identification And Protection Using labVIEW

There is always the possibility of a disturbance or a fault in an electric power system made up of various complex interacting elements. Eelectric power can be transferred from substations to distribution networks with the help of distribution lines. Their lengths, on the other hand, are subject to a variety of faults. In power system distribution lines the error is high especially in lines, that need to be identified and located rapidly, classified correctly and recovered as soon as possible. In India because of poor transmission and distribution system, Currently it is losing more than 55,000 cores rupees every year. Even if we rescue 1% out of it, it will be a good benefit to the power sector and also nature can withhold for some more extent. We can save power if all of the above things work better on line. Unfortunately, it is the fact that all are not in a single roof and not possible to be in a single roof since it is a network of about thousands of kilometres. When we examine the above mentioned content a common objective system is required to detach the unwanted barriers of the power sector. It is mandatory to automate the fault-finding system of the transmission and distribution to receive uninterruptable power in order to reduce losses, save the time, thereby saving the cost.