Fabricating Test Module of Parts For EV With FPGA

Fabricating test module with Field Programmable Gate Array (FPGA) is utilized in numerous parts. This paper deal with a test module that check whether Body Control Module (BCM) is operating normally or not. The proposed test module, divided into three categories: BCM, input signal generator and test equipment, is designed by Verilog based on measured data from commercial EV. The codes are verified through simulation by Modelsim. The test module part which combines the input signal generator and test part, and BCM are programmed into the FPGA respectively and verified. By placing the actual BCM in the FPGA acting as a BCM, it is possible to know whether the BCM is normal or not through the test module part. This research represents that it is applied to other EV modules through this method to create a test module.