A 79.1dB-SNDR 20MHz-BW 2nd-Order SAR-Assisted Noise-Shaping Pipeline ADC with Gain and Offset Background Calibrations Based on Convergence Enhanced Split-Over-Time Architecture

Thanks to the noise-shaped comparator, Noise-Shaping SAR (NS-SAR) ADCs offer high resolution and simultaneously inherit the outstanding energy-efficiency from the SAR ADC [1] -[5]. The poor NS efficacy however calls for a large OSR/order to compensate [1], making a wide bandwidth (BW) and together with low power become challenge. The high speed NS-SAR in [2] only allows a passive NS configuration where its NS efficacy is degraded by the residue attenuation. To improve the efficacy while preserving low power, the dynamic amplifier (D-amp) is used in [3] and [4] to obtain the negative poles and optimized zeros, respectively. They however suffer from the slow sequential integration procedure, thus limiting the BW <; 5MHz. In [5], the D-amp is adopted to enable both pipeline and 1
^st
-order error feedback (EF) NS where it achieves a decent NS efficacy by incorporating the extra feed-forward (FF) path in the 2
^nd
stage. Nevertheless, the NS effect is weaker than the ideal 2
^nd
-order for stability consideration. In this work, the NS efficacy of SAR-assisted NS pipeline architecture is further extended to 2
^nd
order with optimized zeros, utilizing only a single D-amp. It enables an 8.5 dB superior SQNR than [5] with a small OSR of 6.5. The prototype also includes a split-over-time facilitated offset and gain calibration with a convergence enhancement configuration.