Low-Power, Low-Noise Edge-Race Comparator for SAR ADCs

A novel voltage comparator, termed an edge-race comparator (ERC), is proposed in this article. It compares the differential input voltage by generating two propagating edges in two inverter loops and by measuring the distance between the two edges. The two edges race with each other and the winner is finally determined. The comparator is low power and low noise and does not require high-voltage headroom. It can automatically adjust its noise, power consumption, and delay according to the input voltage, thereby saving significant energy and time in coarse comparisons and reducing the noise in fine comparisons (noise averaging is performed over a longer time in fine comparisons). It is well suited for low-power, high-resolution successive approximation register (SAR) analog-to-digital converters (ADCs) (SAR ADCs). Compared to a recently published edge-pursuit comparator (EPC), the proposed structure achieves 3.39 times faster speed at 1-mV input by using a novel configuration of two inverter loops with a distance measurement circuit. The energy consumption per comparison is reduced by 2.73 times at 1-mV input owing to the shorter required comparison time. Designed in a standard 40-nm CMOS process, the measurement results from an ADC show that the comparator energy at the LSB is reduced by 7.5 times, and the ADC sampling rate is increased by 3.85 times.