The Warm Receiver Section and the Digital Backend of the PHAROS2 Phased Array Feed

We describe the development of a multi-channel “warm receiver section” (WS) and of a digital beamformer for the PHAROS2 Phased Array Feed (PAF), a PAF demonstrator for radio astronomy application across the 4-8 GHz radio frequency (RF) band. The PAF is based on an array of 10×11 dual-polarization Vivaldi antennas cryogenically cooled at 20 K along with low noise amplification modules (LNAs). The WS receiver can process the signals from a subset of 24 antenna elements of the array by downconverting them to an intermediate frequency (IF) range, 375-650 MHz, suitable for digitization by the digital beamformer. The latter is based on the iTPM (Italian Tile Processing Module), developed for the Square Kilometer Array (SKA) Low Frequency Aperture Array (LFAA). We modified the iTPM firmware to synthesize four independent beams across the 275 MHz instantaneous IF bandwidth in the iTPM FPGAs (Field Programmable Gate Arrays). The 24 signals are sent from the WS to the iTPM through analogue IFoF (IF over fiber) optical links. In this paper we present the design and performance of the WS and of the digital bemaformer for PHAROS2.