A 36–55 V Input 0.6–2.5 V Output Bypass-Assist Series-Capacitor Power Converter With 93.1% Peak Efficiency and 1.5 mA–5 A Load Range

This article presents a wide voltage and current range bypass-assist series-capacitor power converter for data centers and automotive applications. The overall power converter consists of a 2:1 charge pump (CP) front stage and a 6-level bypass-assist series-capacitor rear stage, by which the proposed design resolves the troublesome duty cycle limit that a typical series-capacitor converter usually faces. Therefore, the output regulation range is significantly extended and only one inductor is required. Besides, since the converter operates like a simple Buck converter with an equivalent input of
$V_{\mathrm {IN}}$
/12, an easy pulse-width-modulation (PWM) and pulse-frequency-modulation (PFM) compatible design is implemented and the efficiency greatly enhanced over a wide load range. The prototype was fabricated using the 180 nm bipolar-CMOS-DMOS (BCD) process and demonstrates a broad operating voltage range of 36~55-V input and 0.6~2.5-V output with 1.5mA~5A load range. For a typical 48-V input, the measured peak efficiencies of 2.5, 1.8, 1 and 0.6-V output are 93.1%, 88.1%, 86.6% and 82.7%, respectively. Additionally, when the load decreases to 30-mA, the proposed converter still achieves efficiencies of 88%, 82%, 80% and 70%, respectively.