Modal Analysis, Inverse-Design, and Experimental Validation of Bandwidth-Controllable Suspended Patch Antennas Loaded With Cylindrical Anisotropic Impedance Surfaces

In this article, bandwidth-controllable suspended patch antennas (SPAs) loaded by anisotropic impedance surfaces (AISs) are proposed. A highly efficient yet accurate semianalytical modal expansion method (MEM) is developed for calculating the input impedance and radiation properties of the proposed antenna, which greatly reduces the simulation time and consumed memory compared to a commercial full-wave solver. The MEM is further utilized by coupling it with a genetic algorithm for effectively performing inverse-design, i.e., optimizing AIS-loaded SPAs with different predefined frequency responses. Three proof-of-concept antenna examples are designed, fabricated, and characterized, including an ultrawideband (UWB) antenna, a dual-wideband antenna, and a band-notched UWB antenna. The operating principle is illustrated by investigating the resonant modes of the AIS-loaded SPAs. The measured results of the three antennas exhibit good agreement with theoretical predictions, demonstrating that all three antennas have vertically polarized conical patterns in the E-plane and omnidirectional patterns in the H-plane with a cross polarization of smaller than −15 dB in their respective operational frequency band(s). The good performance demonstrates that the proposed AIS-loaded SPAs are promising candidates for broadband and multiband communications.