Global persistent SAR sampling with the NASA-ISRO SAR (NISAR) mission

The National Aeronautics and Space Administration (NASA) in the United States and the Indian Space Research Organisation (ISRO) are developing an Earth-orbiting science and applications mission that will exploit synthetic aperture radar to map Earth's surface every 12 days, persistently on ascending and descending portions of the orbit, over all land and ice-covered surfaces. The mission's primary objectives will be to study Earth land and ice deformation, and ecosystems, in areas of common interest to the US and Indian science communities. This single spacecraft solution with an L-band (24 cm wavelength) and S-band (10 cm wavelength) radar has a swath of over 240 km at fine resolution, using full polarimetry where needed, uses a reflector-feed system whereby the feed aperture elements are individually sampled to allow a scan-on-receive (“SweepSAR”) capability at both L-band and S-band. This design is in contrast to recent concepts towards large constellations of smaller radar satellites, and is driven by the science requirements for complete coverage over the 12-day repeat cycle, using repeat pass interferometry and polarimetry to measure deformation and surface properties. A single spacecraft with enough aperture, power, duty cycle, and downlink capacity was determined to be a more practical and implementable solution that multiple smaller spacecraft. The use of a single large aperture reflector for both the L- and S-band radars enables both to have comparable performance, leading to overall development and operational efficiencies.