Analysis and optimization of BCM peak current mode control techniques for microinverters

This paper presents a detailed power loss model for a microinverter with three different zero voltage switching (ZVS) boundary conduction mode (BCM) current modulation methods. The model is used to calculate the optimum peak current boundaries for each modulation method. Based on the power loss model, a dual-zone modulation method is proposed to further improve the microinverter efficiency. The proposed modulation method provides two main benefits: the addition of one more soft switching transition and low peak current boundary. The additional soft switching transition reduces switching losses by means of zero current switching (ZCS). The lower peak current boundary reduces inductor rms current and conduction losses as well as allowing the output filter inductor to be smaller and more efficient. An improved BCM peak current control method was proposed and implemented on a microinverter prototype. The control circuit provides a highly accurate representation of the filter inductor current waveform and also provides galvanic isolation which simplifies control circuit design. The experimental results on a 400-W three-phase half-bridge microinverter validate the theoretical analysis of the power loss distribution and demonstrate that further improvement in efficiency can be achieved by using the proposed dual-zone modulation method.