Prediction Model of Hysteresis Characteristics of Non-Oriented Silicon Steel Under DC Bias

Accurate simulation of the hysteresis loop is challeng-ing, especially using manufacturer data. Traditional parameter extraction methods (e.g., using optimization algorithm and solving transcendental equation) can extract the static Jiles-Atherton (JA) hysteresis model parameters under an arbitrary condition, but it requires fitting parameters because the model parameters vary with flux density. To reduce the dependence on measurement data, this paper proposes a simple but effective parameter extraction method. Firstly, an identification procedure of minor loop is presented using only static
B
-
P
loss curves by investigating the influence of model parameters on hysteresis loop, where the average root-mean-square error of the hysteresis loop is decreased by 4. To estimate the dynamic loss coefficients under DC bias, a calculation method based on the Statistical Theory of Losses (STL) is established by investigating the law of influence of DC bias on hysteresis loss and dynamic loss. The effectiveness of the proposed method is verified.