A Layout Design Flow for RSFQ Circuits Based on Cell Clustering and Mixed Wiring of JTLs and PTLs

An automated layout design flow for rapid single-flux-quantum circuits is proposed in this article. In order to realize small circuit area and low latency, both Josephson transmission lines (JTLs) and passive transmission lines (PTLs) are used for interconnects. Placement and routing are performed considering effective use of JTLs and PTLs. Logic cells are grouped into clusters, and JTLs are used inside clusters. PTLs are used among clusters. The placement process is composed of three steps: first, cell clustering, second, cell placement and JTL routing in each cluster, and third, cluster placement. After the placement process, routing among clusters are performed using PTLs. We applied the proposed design flow to sample circuits with several hundreds of gates. Though the circuit area is not fully optimized, the latency of the circuits designed by the proposed design flow are lower than those of the circuits designed manually.