Cascade Edge Filter for Demodulation of Quasi-Distributed FBG Sensor

The realization of multiple demodulation sche- mes of fiber Bragg grating (FBG) sensor is important for its engineering application. Here, we proposed a new edge filter that is formed by cascading dispersion compensation fiber (DCF) and no-core fiber (NCF) structure between two single-mode fibers (SMFs) for demodulation of quasi-distributed FBG sensor. The edge filter can be suitable for FBG with different center wavelengths by changing its structure parameters to achieve a wide range of FBG demodulation. In order to verify the performance of the edge filter, a demodulation system for quasi-distributed FBG sensor is successfully designed by introducing an optical time-domain reflectometer (OTDR), the wavelength shift of FBG caused by the change of temperature and strain is converted into power change through the edge filter, so as to realize temperature and strain demodulation. In the experiment, two FBG sensors separated by 500 m were set at the end of a 3000-m optical fiber for temperature and strain monitoring. The results show that the temperature sensitivity is 0.23 dB/°C from 50 °C to 100 °C, and the strain sensitivity is 0.01658 dB/
$\mu \epsilon $
from 0 to
$669.6\,\mu \epsilon $
. The edge filter for FBG demodulation has the advantages of high sensitivity, adjustable structural parameters, low cost, and independent multipoint/multiparameter demodulation.