A jitter equalization technique for minimizing supply noise induced jitter in high speed serial links

As data rate of serial interface has increased dramatically, timing margin has gotten tighter and tighter. Supply voltage has also kept deducing according to silicon process technology. However, supply noise is hardly reduced due to higher data rate, a huge number of transistors and slower improvement of packaging technology. Therefore, the jitter due to supply noise can be quite large compared to other jitter components. The jitter due to supply noise is not cancelled out by CDR or PLL at the receiver since PDN resonance frequency is higher than loop bandwidth of CDR or PLL. It is not cost effective if only PDN improvement is adopted to reduce supply noise induced jitter. It is essential to optimize performance at architecture level including circuits and PDN. In this paper, the new technique is proposed to minimize supply noise induced jitter in high speed serial interface. The proposed techniques called Jitter Equalizer (JEqualizer) improves jitter performance by 80% with minimal power increase and area over head. The impact is evaluated by supply noise induced jitter modeling.