Tunable Laser via High-Density Integration of DFB Lasers With High Precision Wavelength Spacings

Fast optical switches have the potential of lowering the cost, power, and latency of today’s data-center networks. The on-off switching of DFB lasers in arrays is poised to provide extremely fast switching because the on-off time of a DFB laser is the level of sub-nanosecond. However, the key of the DFB laser array based tunable laser lies in the high precision control of the lasing wavelength. In this letter, we proposed and experimentally demonstrated a tunable laser by integrating 16 DFB lasers based on the reconstruction-equivalent-chirp (REC) technique. Without using the conventional e-beam lithography, an equivalent
$\lambda $
/4 phase-shift is fabricated in each DFB laser to ensure the single-longitudinal-mode (SLM) yield. Moreover, high precise wavelength spacing is realized. Wavelength deviations of 89.3% DFB lasers are within ±0.2 nm. The output power of all the channels is above 7 mW, and the relative intensity noise is below −130 dB/Hz. By on-off switching the lasers, sixteen channels with 2.4-nm spacing can be fast switched. The switching time between any two channels is less than 50 ns. In addition, a wide-band continuous wavelength tuning range of 38.4 nm can be obtained with a small temperature variation of 18 °C. Owing to the REC technique, the tunable laser via high-density integration of DFB lasers is demonstrated with simple fabrication, high SLM yield, and high wavelength precision, which opens up a path for wide-band and especially fast tunable lasers.