A novel low-cost method for fabricating bifacial solar cells

In this work we propose and demonstrate a novel and cost-effective method to fabricate bifacial cells with conventional homojunction architecture. The method combines benefits of lithography-less, self-aligned patterning during deposition of antireflective coating (ARC) and simultaneous metallization of both surfaces aided by electroplating. We have fabricated a conventional diffused n
⁺
pp
⁺
junction bifacial solar cell on a monocrystalline silicon (c-Si) substrate using this method. Electrochemically grown nickel is used to simultaneously form front and back electrodes. The bifacial solar cell fabricated with an un-optimized process has a front and rear efficiencies (under AM1.5G one sun illumination) of 12% and 8.66%, respectively. Part of the low performance of the cell is attributed to poor quality of the passivation layer and the post deposition annealing to reduce pinholes in deposited SiN
_x
layer to prevent parasitic plating.