Theoretical Analysis of Differential Microphone Array Beamforming and an Improved Solution

Differential microphone arrays (DMAs), which are responsive to the differential sound pressure field, have attracted much attention due to their properties of frequency-invariant beampatterns, small apertures, and potential of maximum directivity. Traditionally, DMAs are designed and implemented in a multistage (cascade) way, where a proper time delay is used in each stage to form a beampattern of interest. Recently, it was reported that DMAs can be designed by solving a linear system of equations formed from the information about the nulls of the desired beampattern. This paper deals with the problem of beamforming with linear DMAs. Its major contributions are as follows. 1) By using the spatial
${\cal Z}$
transform, we present some theoretical analysis of both the traditional cascade and new null-constrained DMA beamforming. It is shown that the cascade and null-constrained DMAs of the same order with the same number of sensors are theoretically identical. 2) We develop a two-stage approach to the study of the robust DMA beamformer, which is based on the principle of maximizing the white noise gain (WNG). The first-stage of this approach is in the structure of the traditional non-robust DMA while the second-stage filter is optimized for improving the WNG. 3) Using the two-stage approach, we show that the robust DMA beamformer may introduce extra nulls in the beampattern at high frequencies; particularly, it introduces
$M - N - 1$
extra nulls if the interelement spacing is equal to half of the wavelength, where
$M$
and
$N$
are the number of sensors and the DMA order, respectively. 4) We develop a method that can solve the extra-null problem while maximizing the WNG in robust DMA beamforming, i.e., a robust solution with a frequency-invariant beampattern.