High Bandwidth Series-Form Switch-Linear Hybrid Envelope Tracking Power Supply With Reduced Bandwidth Envelope and Step-Wave Edge Adjustment Methods

The series-form switch-linear hybrid envelope tracking (ET) power supply is constituted by a multilevel converter and a linear amplifier connected in series, featuring high efficiency and wide tracking bandwidth. With the development of wireless communication, the envelope bandwidth of the radio-frequency signal reaches tens of megahertz and even hundreds of megahertz, leading to a high switching loss in the multilevel converter and thus degraded overall efficiency of the ET power supply. To reduce the switching loss and ensure high tracking bandwidth, this article proposes to let the multilevel converter track the reduced bandwidth envelope signal and the linear amplifier track the original one. Then, a step-wave edge adjustment method is proposed to adjust or eliminate the rising and falling edges of the step-wave voltage for further reducing the equivalent switching frequency of the multilevel converter and the voltage across the power device of the linear amplifier. As a result, the switching loss in the multilevel converter and the power loss in the linear amplifier could be reduced, leading to a notably higher overall efficiency. A prototype with 40 MHz tracking bandwidth, 7–27 V output voltage, and 15 W average output power is fabricated and tested in the lab, and the experimental results are provided to verify the effectiveness of the proposed method.