Multivector Model Predictive Power Control With Low Computational Burden for Grid-Tied Quasi-Z-Source Inverter Without Weighting Factors

Nowadays, a model predictive control has gained a lot of attractions for power converter. To overcome the defects of the conventional model predictive control and achieve better performance, this article presents a multivector model predictive power control (MV-MPPC) with low computational burden for the grid-tied quasi-Z-source inverter (qZSI). Compared with the conventional model predictive power control (MPPC) that adopts only one vector in one control period, the proposed MV-MPPC applies several vectors including two active vectors, one null vector, and one shoot-through (ST) vector to fulfill the expected performance for the grid-tied qZSI. By calculating the optimal duty ratios of the ST vector, the inductor current ripple can be greatly reduced. To eliminate the weighting factor, a modified sliding-mode control method for simultaneously controlling the capacitor voltage and the inductor current to their setting points is proposed. Furthermore, a quick and effective optimal sector selection method is given, which chooses the optimal sector through a look-up table instead of a bunch of complex calculations. Hence, the computational burden of the proposed MV-MPPC is decreased with significance. Both simulation and experimental results are shown to validate the effectiveness and the advantages of the proposed method.