ON Effect of Right-Half-Plane Zero Present in Buck Converters With Input Current Source in Wireless Power Receiver Systems

In wireless power receiver systems, the buck converter is widely used to step down the higher rectified voltage derived from the wireless receiver coil, to a lower output voltage for the immediate battery charging process. In this article, the presence and effect of the right-half-plane (RHP) zeros found in the small-signal inductor-current-to-duty-ratio and output-voltage-to-duty-ratio transfer functions of the buck converter in the wireless power receiver system on the control performance, are investigated. It is found and mathematically proved that the RHP zeros are introduced by the current source nature of the system attributed to the series-series compensation and finite dc-link capacitance. The RHP zero not only results in nonmonotonic open-loop dynamic response but also complicates the design of feedback control and causes potential closed-loop instability. Theoretical and experimental results are provided to validate the presence of the RHP zeros and their effect on open-loop and closed-loop dynamic responses.