A Family of High Frequency AC-LED Drivers Based on ZCS-QRCs

A family of dimmable ac light-emitting-diode (LED) drivers fed from dc voltages, is presented in this paper based on zero-current-switching quasi-resonant converters. The proposed family of drivers is based on replacing the diode in the conventional converter topologies (i.e., buck, boost, or buck-boost) by a string of high-brightness LEDs (HB-LEDs). Hence, the HB-LED string will be working as the rectifier diode and the load, switching at the same frequency of the main switch. In this case, the output current, which is experimentally validated, shows a negative current peak due to the reverse-recovery effect of the HB-LEDs. In order to reduce the reverse-recovery effect on the HB-LEDs, the main switch of the proposed topologies is replaced with a full-wave resonant switch, which makes possible to reduce the di/dt during the turn-off of the HB-LED string, therefore the reverse-recovery effect is eliminated. Moreover, the dimming of the HB-LEDs is done by means of changing the switching frequency of the converter by varying the turn-off, while keeping a constant turn-on time. The proposed converters are suggested to be used in a postregulator stage of an ac-dc converter or as the interface between the low-voltage bus and the HB-LED string in a dc nanogrid. In order to validate the analysis, the proposed topologies have been experimentally tested on a constructed prototype with an output power of 7.5 W, that is able to achieve an electrical efficiency of 94.5% and a luminous efficacy of 110 lm/W at full load. Moreover, the analysis has been extended to a comparison in terms of reliability with the conventional topologies on a 700-h test.