The Worst Conducted EMI Spectrum of Critical Conduction Mode Boost PFC Converter

The switching frequency of the boost power factor correction (PFC) converter operating in critical conduction mode (CRM) varies in a line cycle, making the conducted electromagnetic interference (EMI) spectra of the converter appear great differences under different input voltage and load conditions. The EMI filter should be designed according to the worst conducted EMI spectrum of the converter, so as to suppress the conducted EMI of the converter to be lower than the standard limits under all working conditions. This paper analyzes the characteristics of the common-mode (CM) and differential-mode (DM) noise spectra of the CRM boost PFC converter, and discusses the effects of the varied switching frequency on the peak, quasi-peak (PK), and average (AV) conducted EMI spectra. It is revealed that, for the conducted EMI limits defined in EN55022 class B, which are specified within 150 kHz to 30 MHz, the EMI filters required for suppressing the QP spectra of the conducted EMI of the CRM boost PFC converter are larger than that for suppressing the AV spectra, and the QP values of the conducted EMI under all working conditions are lower than a certain maximum boundary. The input voltage and load conditions for the worst CM and DM noise spectra of the converter are derived in this paper, thus the repetitive measurements and numerical calculations are avoided. A CRM boost PFC converter prototype is fabricated, and the evaluation of the measured conducted EMI spectra and the EMI filter design example verified the theoretical analysis.