Optimization Design and Control of Single-Stage Single-Phase PV Inverters for MPPT Improvement

Due to the inherent double-frequency (2
f
₀
) ripple in single-stage single-phase photovoltaic grid-connected inverters, the maximum power point tracking (MPPT) will inevitably be affected. To improve the MPPT performances, a passive
LC
power decoupling circuit with a robust second-order sliding-mode control (SOSMC) is thus proposed in this article. With the passive
LC
decoupling path, the double-frequency pulsation on the dc link is effectively cancelled out. Thus, the MPPT accuracy is significantly enhanced, and the utilization of a small dc-link capacitor becomes possible. However, resonance between the
LC
circuit and the main dc-link capacitor may appear, which can be damped through an active damping method. Additionally, the proposed SOSMC ensures good steady-state, dynamic performance (voltage fluctuation and settling time), and the robustness of the dc-link voltage, which is also beneficial to MPPT control in terms of high accuracy and fast dynamics. The systematic design of SOSMC is presented, and a detailed parameter optimization design of
LC
decoupling circuit is discussed. Experimental tests are performed on a 2.5-kW single-stage single-phase grid-connected inverter, and the results validate the effectiveness of the proposed strategy.