A Direct AC–AC Switched-Capacitor Converter With Input-Series Output-Parallel and In-Phase/Out-of-Phase Capabilities

In this article, a bidirectional transformerless multilevel direct ac–ac switched-capacitor converter (SCC) is proposed with both in-phase and out-of-phase output voltage capabilities. This converter can be used for series compensator applications, such as dynamic voltage restorers (DVRs), to compensate grid voltage sag and swell phenomena by incorporating its input–output common ground. Its input-series output-parallel capabilities reduce voltage and current stresses of the converter components in multilevel configurations, which lead to higher efficiency and lower manufacturing costs for high-power applications. Furthermore, proper utilization of an interleaving control scheme can provide lower input and output currents ripples values and smaller filter sizes. The proposed SCC operation principle and its mathematical analyses are given, in detail. Additionally, its switching patterns have been developed with a safe-commutation strategy to obtain various output voltages. Subsequently, both single- and two-level SCC prototypes are implemented as series compensators for DVR applications. Moreover, experimental results are given to generate in-phase and out-of-phase regulated output voltages. The experimental results at 2 kW show that the output voltage changes are less than 3% under the steady-state conditions, despite the large input voltage changes from 140 to 300 V. The converter maximum efficiency value is equal to 95.4% at maximum output power value.