Analysis of Integrated Winding Configuration in Dual-Electrical-Port Machine

A novel winding configuration named “integrated winding” was proposed to realize function of original two sets of windings, that is, it produces two independent control magnetic fields with different pole pairs (not slot harmonics). The concrete realization method is through the coordinated operation of controllers, and two current components with different phases are injected into the same coil to generate the required magnetic fields according to star of slots. Because the magnetic field produced by the winding is only related to the instantaneous current in each coil, rather than specific connection of coils. The integrated winding not only simplifies the winding configuration but also increases the electric loading, thus improving the torque density. The general method of integrated winding configuration and current injection rule iss established. The split-phase rules of integrated winding are summarized, and the feasibility of the six-phase and 12-phase integrated windings is then proved through finite-element analysis (FEA). A prototype is fabricated, and the experimental results verify the availability of the integrated winding.