A New Reconstruction Algorithm for Geometric Shape of Static Overhead Transmission Lines

This paper proposes a reconstruction algorithm for the geometric shapes of static overhead transmission lines that is based on the spatial coordinate data (obtained by field mapping) and the corresponding inclination data (obtained by attitude sensors). The algorithm takes the piecewise cubic Hermite interpolation function as the basic framework and corrects the aforementioned two types of data based on the “minimum energy principle” of the transmission line system. The introduction of a new energy function in modified energy method (MEM) overcame the shortcomings of conventional energy method (CEM) in fairing strategy, and the new Fairing Criterion made result curves more consistent with the mechanical properties of transmission lines. In the numerical simulation tests, the two energy methods were compared in terms of load type, horizontal span, elevation difference, and anti-disturbance ability, which showed that MEM has a higher reconstruction accuracy (average Euclidean distance is less than 1 cm) and better robustness than CEM. Meanwhile, the key parameters involved in the algorithm were discussed to guide the application in practical engineering. In addition, measurement tests under non-uniform icing were carried out in the field test station, and the results showed that the maximum relative error is less than 0.1%.