A Joint Vibration and Arcing Measurement System for Online Condition Monitoring of Onload Tap Changer of the Power Transformer

Vibration measurement has been adopted in some utilities in Australia, Canada, and several European countries for online condition monitoring of the power transformer's onload tap changer (OLTC). By comparing measured vibration signals at different stages, it might be possible to assess changes of OLTC's condition. However, there are still considerable difficulties in correlating vibration signals to the events of OLTC operation, which may impair the capability of vibration measurement for OLTC condition monitoring. Therefore, arcing measurement is proposed in this paper to complement the vibration measurement. Arcing is provoked when the OLTC switching contact closes at a fixed tap position and can lead to electromagnetic signals flowing through transformer windings, finally reaching earth. The arcing measurement is achieved by using a high-frequency current transducer (HFCT) clamping on the transformer's grounding cable. The joint vibration and arcing measurement can provide a better means for interpreting events involved in OLTC operation and facilitating improved OLTC condition monitoring. Since HFCT measured arcing signals can be coupled with noise, a probabilistic wavelet transform is thus employed in this paper to extract arcing signals from noise. Field measurements on two different types of OLTCs are performed using the joint vibration and arcing measurement system to validate the proposed methodology.