Design and Performance Analysis of a Novel Radially Distributed Electromagnetic-Hydraulic Retarder for Heavy Vehicles

To solve theproblems of an insufficient braking moment for the eddy current retarder at high speed, a small braking moment and slow response of the hydraulic retarder at low speed, and a low power density of the existing electromagnetic hydraulic retarder(EHR), a novel radially distributed electromagnetic-hydraulic retarder(R-EHR) was proposed. The R-EHR fully absorbs the advantages of the braking characteristics of hydraulic retarders and eddy current retarders. The cooling fluid is used to realize the braking of the hydraulic part. At the same time, it acts on the heating surfaces to improve the torque of the electromagnetic part. In this paper, finite element models of the flow field and electromagnetic field are established to predict braking performance. The braking performance of the R-EHR is obtained by bench test, the error between the simulation and experimental data is compared, and the experimental data are analyzed. The results show that the proportion of electromagnetic braking torque in the novel R-EHR is more reasonable. The braking torque increased by 26% and the power density increased by 37.5% at 2000 RPM compared to that of the EHR. The R-EHR can control the braking torque only by adjusting the current, thus simplifying the control system.