Comparative Analysis of Different Topologies of Linear Switched Reluctance Motor With Segmented Secondary for Vertical Actuation Systems

This paper presents the overall comparison of four possible topologies of linear switched reluctance motor with segmented secondary (LSRMSS) as candidates for vertical actuation systems. The analytical design approach which treats each unit of LSRM as independent force generator is applied to design the four machines. All the four machines can be seen as 2-unit force generator although they have different winding configurations and topologies. In this case, the four machines can be designed to have similar force profile due to the inherent modular characteristics of LSRMSS. Force production, active material mass, end effects, copper loss and thrust density have been considered as well as the dynamic performance. The results indicate that the topology with toroidally wound mover has the highest force density and payload ratio capability. This topology is finally chosen to be prototyped for a 1m long vertical propulsion actuator. The experiment is performed to validate the theoretical analysis above.