Dynamic Analysis and Active Stabilization of a Utility-Scale Grid-Connected Current-Source Inverter-Based PV System Considering Source Dynamics

This paper investigates the effects of the dynamic properties of a photovoltaic generator (PVG) on the stability of a grid-connected current-source inverter (CSI)-based photovoltaic system and presents a simple yet effective active compensator to ensure system stability. A detailed equivalent model of the PVG that considers the dynamic resistance, diffusion capacitance, series inductance, and dc cable resistance and inductance is used, and the effects of these parameters are assessed. It has been found that when the PVG operates in the constant-current region (CCR), the phase margin becomes negative in the control-to-input dynamics, which alters the stability of the dc-link current control. The change in the system dynamics when the operating point of the PVG shifts from the constant-voltage region (CVR) to CCR is verified through a detailed small-signal state-space model of the complete system. Furthermore, an active compensator is proposed to ensure stable dc-link current control operation at all operating points of the PVG. The influence of different control parameters on the integrated system dynamics is examined to determine the range of the control parameters required for stable operation. The performance of the proposed system under utility-grid fault, grid voltage parameter variation, weak grid, and changes in insolation level is also evaluated. Detailed nonlinear time-domain simulation results, using a typical utility-scale CSI-based PV system, validate the analytical results and the effectiveness of the proposed active stabilization under different operating conditions.