Silicon Surface Passivation by ALD-Ga2O3: Thermal vs. Plasma-Enhanced Atomic Layer Deposition

Silicon surface passivation by gallium oxide (Ga2O3) thin films deposited by thermal- and plasma-enhanced atomic layer deposition (ALD) over a broad temperature range from 75 °C to 350 °C is investigated. In addition, the role of oxidant (O3 or O-plasma) pulse lengths insufficient for saturated ALD-growth is studied. The material properties are analyzed including the quantification of the incorporated hydrogen. We find that oxidant dose pulses insufficient for saturation provide for both ALD methods generally better surface passivation. Furthermore, different Si surface pretreatments are compared (HF-last, chemically grown oxide, and thermal tunnel oxide). In contrast to previous reports, the annealing time to activate the surface passivation is found to be significantly shorter. The best surface saturation current densities (J0s) or surface recombination velocities (Seff) are 6 and 9 fA/cm
²
or 0.6 and 1.5 cm/s for n- and p-type Si, respectively. We correlate the surface passivation with the negative fixed charge density (Qfix; field-effect passivation) and the interface defect density (Dit; chemical passivation). It turns out that a high Qfix is present, irrespective of the utilized ALD-method, deposition temperature, or post-annealing, whereas low Dit is only achieved for plasma-enhanced ALD at low temperatures. A critical H-density of ~10
¹⁶
cm
^-2
is identified as a necessary but not sufficient condition for excellent surface passivation. Finally, contact resistivities are measured to investigate the possibility of using ALD-Ga2O3 as passivating contact material. In order to understand the current-voltage measurements, the energetic positions of the band edges and the Fermi level are determined by ultraviolet photoelectron spectroscopy and Kelvin probe.