CWDM DFBLD Transmitter Module for 10-km Interdata Center With Single-Channel 50-Gbit/s PAM-4 and 62-Gbit/s QAM-OFDM

Single-channel 50-Gbit/s 4-level pulse amplitude modulation (PAM-4) and 62-Gbit/s orthogonal frequency division multiplexed quadrature amplitude modulation (QAM-OFDM) direct encoding of an uncooled coarse wavelength division multiplexer (CWDM) 100-Gbit/s distributed feedback laser diodes (DFBLD) transmitter module at 1310-nm transmitter interdata center transmission over 10-km single-mode fiber (SMF) are demonstrated. To enable preleveled 16-QAM OFDM and PAM-4 data transmissions at 62 and 50 Gbit/s, the 1310-nm channel of the DFBLD CWDM transmitter provides modulation bandwidth of 15 GHz, side-mode suppression ratio of 48 dB, and relative intensity noise of -126 dBc/Hz. For encoding the PAM-4 data, the 1310-nm channel of the CWDM DFBLD 100-Gbit/s transmitter achieves transmission capacities of 58 and 50 Gbit/s after BtB and 10-km SMF transmissions, respectively. Instead of supporting the back-to-back 16-QAM OFDM with the transmission at 62 Gbit/s with forward error correction (FEC) certified BER of 3.3 × 10
^-3
, such a CWDM 100-Gbit/s DFBLD transmitter module can still maintain its highest data rate capacity to indicate a receiving power penalty of 0.35 dB even after 10-km SMF propagation. This is mainly attributed to the selected channel wavelength of the narrow-linewidth DFBLD, which suffers from extremely low chromatic dispersion and RF fading effect.