Modulation Induced Current Imbalance and Its Sensorless Control of a GaN-Based Four-Phase DC–DC Power Amplifier

The development of wide band-gap semiconductor devices is rapidly promoting the development of power electronics technology, especially in high frequency (HF) power converter region. A category of HF power converter is switch-mode power amplifier (PA). This paper focuses on the implementation of a multiphase dc-dc PA with high bandwidth and high power rate. When naturally sampled phase-shifted carrier modulation is implemented in the practical digital control system to control this HF power converter, the pulsewidth error problem caused by limited domain frequency of control chip becomes much severer. As a result, dc voltage component of each phase becomes different under several conditions, leading to current imbalance among phase inductors. This paper analyzes this problem and proposes a sensorless control method to solve it, based on the injection of random sequence in reference wave. A four-phase prototype employing GaN devices is fabricated, switching at 1 MHz. Current imbalance and effectiveness of the proposed control method are verified by experimental results. The prototype is capable of uniformly amplifying sine signal within 200 kHz and a 350 kHz bandwidth random signal, with peak output power up to 810 W.