A Chopper Class-D Amplifier for PSRR Improvement Over the Entire Audio Band

The power supply rejection ratio (PSRR) of conventional differential closed-loop Class-D amplifiers is limited by the feedback and input resistor mismatch and finite common-mode rejection ratio (CMRR) of the operational transconductance amplifier (OTA) in the first integrator. This article presents a 14.4-V Class-D amplifier employing chopping to tackle the mismatch, thereby improving the PSRR. However, chopping-induced intermodulation (IM) within a pulsewidth modulation (PWM)-based Class-D amplifier can severely degrade PSRR and linearity. Techniques to mitigate such IM are proposed and analyzed. To chop the 14.4-V PWM output signal, a high-voltage (HV) chopper employing double-diffused MOS (DMOS) transistors is developed. Its timing is carefully aligned with that of the low-voltage (LV) choppers to avoid further linearity degradation. The prototype, fabricated in a 180-nm BCD process, achieves a PSRR of >110 dB at low frequencies, which remains above 79 dB up to 20 kHz. It achieves a total harmonic distortion (THD) of −109.1 dB and can deliver a maximum of 14 W into an 8-
$\Omega $
load with 93% efficiency while occupying a silicon area of 5 mm
²
.