Spatial Heterogeneity of Albedo at Subpixel Satellite Scales and its Effect in Validation: Airborne Remote Sensing Results From HiWATER

Characterizing the subpixel heterogeneity within satellite pixels is a key issue in validation. Nevertheless, it is challenging due to multi-scale problems in the geological description based on remote sensing. Based on an airborne platform, the multi-scale variation laws of several key indicators in validation including spatial heterogeneity (SH), representativeness errors, and representative area with subpixel size were analyzed and discussed. Furthermore, this article discussed the optimal subpixel size to assess SH within a coarse pixel and the optimal footprint of
in situ
measurements for building dense and sparse validation networks. SH decreases with the increase of subpixel size. And a reduction of about 10% can be obtained from 5 m
$\times 5$
m to 150 m
$\times150$
m subpixel size, depending on the degree of SH within the typical satellite pixels. And the sensitiveness of SH to subpixel size decreases gradually with the increasing of subpixel size. Ideally, SH should be assessed using maps with pixel sizes corresponding to the footprint of
in situ
measurements. Regarding the deployment of future validation networks, the footprint of
in situ
sites should be designed at least larger than 25 m for dense networks. And much larger footprints (e.g., 100 m) are preferred in designing sparse networks. The representativeness error is not fully related to subpixel sizes because it is affected by many factors. The findings are also transferable to model evaluation when comparing model grid values to local observations.