Multichannel Sliding Spotlight SAR Imaging: First Result of GF-3 Satellite

Multichannel SAR system operating in the sliding spotlight mode has the capacity of imaging with very high resolution as requested by future spaceborne synthetic aperture radar (SAR) mission; hence, it has been attracted more and more attention in the SAR community. In a multichannel sliding spotlight SAR system with
$N$
channels, the overall Doppler bandwidth of the data acquired by each channel is greater than
$N \cdot \text {PRF}$
; thus, the preprocessing algorithms (channel mismatch calibration and signal reconstruction) are no more available. To address this issue, a full-aperture imaging method for azimuth multichannel sliding spotlight mode is proposed in this article. First, the raw data of each channel need to be preprocessed based on a deramping operation, which can obtain an unambiguous Doppler spectrum. Afterward, the algorithm proposed for single-channel sliding spotlight mode can be performed. Finally, to avoid possible back-folded SAR images, postprocessing after focusing is demanded in some cases. The imaging results of the data acquired by GaoFen-3 (GF-3) are given for the first time in this article, which proves the effectiveness of the proposed imaging method and demonstrates the capacity of high-resolution wide-swath imaging of the multichannel sliding spotlight mode.