Disturbance-Observer-Based Feedback Linearization Control for Stabilization and Accurate Voltage Tracking of a DC–DC Boost Converter

The nonminimum-phase property of the dc–dc boost converter can create difficulties in designing a stable, robust, and fast control for the output voltage. In this article, these difficulties are reduced by modifying the state model of the boost converter in such a way that it behaves like a minimum-phase system. More specifically, the control input entering the state equation for the output voltage is treated as an unknown disturbance to make the relative degree of the system equal the system’s order. As a result, the modified model does not exhibit zero dynamics, so that it can be treated as a minimum-phase system for the control design. The modified model is, then, used to derive a dynamic compensator for the output voltage regulation. More explicitly, the dynamic compensator is designed based on combining linearizing feedback control with a disturbance observer. The latter is employed to compensate for model uncertainties and unknown load with a view to ensure asymptotic regulation under the composite controller. The asymptotic regulation is achieved due to the integral action property characterizing the disturbance observer. More interestingly, after simple algebraic manipulation, it turns out that the composite controller reduces to a dynamic state feedback control plus an antiwindup scheme to mitigate the effect of control saturation during transients. The performance of the proposed controller is verified by experimental tests. The experimental results demonstrate the ability of the proposed controller to achieve good transient and steady-state performances.