Solid-State Transformer for Grid Interface of High-Power Multipulse Rectifiers

This paper proposes a medium-frequency (MF) solid-state transformer (SST) based grid interface for high-power multipulse rectifiers. In the proposed approach, the low-frequency ac (grid) voltage is transformed to MF voltage via front-end converters. The three single-phase MF outputs from these converters are fed to the primary side of a three-phase, five-limb multiwinding isolation transformer (or alternately three one-phase transformers). The secondary side windings from the transformer are configured in a certain “zig-zag” arrangement, which are connected to the inputs of three-phase diode rectifier modules as in a typical multipulse system. The proposed topology can better than double the power density by reducing volume (or weight) of the required front-end isolation transformer while maintaining the same input current quality as a conventional low-frequency transformer based approach. Usage of an open-loop square wave pulse width modulation for the front-end converters makes this approach simple to implement. This paper explains the proposed concept taking an adjustable speed drive application's perspective using modeling, simulation, and experimental results from a scaled down laboratory prototype.