Effects of Launch Mass on Sliding Electrical Contact

The sliding electrical contact (SEC) between rails and armature is a focus in electromagnetic rail launchers. The extreme conditions, such as high current density, high temperature, and high contact pressure, influence SEC performance. In this article, the segmented rails were used to study the effects of launch mass on SEC. Two groups of experiments, armatures with and without launch mass, were carried out. The mass difference of rail parts was measured, the macro- and micromorphology of rails surface were observed, and the driving current and muzzle voltage were obtained. Three conclusions are obtained: 1) the mass difference of rail parts in shooting with launch mass is greater than that without launch mass, due to the high temperature of armature contact surfaces; 2) because of the electron migration, the mass difference of the cathode rail is larger than the anode rail; and 3) the contact resistance between rails and armature without launch mass is lower than that with launch mass, result from the large contact area. Moreover, the current density and the temperature of the armature and rails were calculated. Results show that the temperature of surface of armature with launch mass is higher than that without launch mass. In a word, based on the results from experiments and simulations, the launch mass improves the sliding electric contact performance.