A SiGe Power Amplifier With Double Gain Peaks Based on the Control of Stationary Points of Impedance Transformation

A broadband SiGe power amplifier (PA) with double gain peaks for 5G applications is presented. The differential structure is widely adopted in millimeter-wave circuit design to decrease the impact of the source parasitic inductance that is induced by the bonding wires. Since differential PA results in a higher impedance transformation ratio of the matching network, differential PAs generally have narrower bandwidth than single-ended PAs. Through the bandwidth analysis of the matching network, the transformer used for interstage matching is elaborately designed to ease gain fluctuations. By controlling the stationary points of impedance transformation, the maximum available gain characteristic of a transistor, which decreases with increasing frequency, can be compensated. The gain curve of PA, thus, has double gain peaks within operational frequencies to make its frequency responses as flat as possible. The proposed PA for the frequency band from 27 to 37 GHz is fabricated in a standard 130-nm SiGe BiCMOS process, which occupies 0.36 mm
²
. Under the 2.5-V voltage supply, the SiGe PA exhibited a power gain of 33.5 dB and output power of 21.3 dBm with 24% power-added efficiency at 31 GHz. It achieves a 34% 3-dB small-signal
$S_{21}$
bandwidth from 27.3 to 38.5 GHz.