High-Selectivity Filtering Patch Antennas Based on MultiPath Coupling Structures

In this article, we present a design method of high-selectivity filtering antennas based on a dual-probe feeding structure. The first stage of the filtering circuit consists of two or three coupled resonators which are then coupled to the radiating patch acting as the last resonator of the filter. Cross-coupling is used to obtain transmission zero, and thus the selectivity of the filtering antennas is improved. A cascaded triplet (CT) filtering patch antenna, which produces a radiation zero at the high-frequency edge of the passband, and a cascaded quadruplet (CQ) filtering patch antenna, which produces radiation zeros at both edges of the passband, are designed for verification. The process of designing the filtering patch antenna is given in detail. The designed CT filtering patch antenna has a bandwidth of 1.029-1.17 GHz and a radiation zero at 1.19 GHz. The designed CQ filtering patch antenna has a bandwidth of 1.029-1.17 GHz and two radiation zeros at 1.012 and 1.19 GHz, respectively. The peak gain of the CT filtering patch antenna is 9.35 dBi and that of the CQ filtering patch antenna is 9.16 dBi. A dual-polarized CQ filtering patch antenna is fabricated, showing a good performance in measurement.