Focusing of the Sheet Electron Beam With Two-Plane Periodic Cusped Magnetic System for Terahertz TWTs

The focusing and transmission of a sheet electron beam with periodic cusped magnetic (PCM) fields were studied for the terahertz traveling-wave tubes (TWT). Due to the limitation on the width of the sheet beam from the slow wave structure (SWS), the resulting transmission current density is inevitably high and the width of the sheet beam is highly disproportionate to the magnet system. This defines a situation different from before, which challenges the validity of the traditional PCM scheme. Thus, the focusing of a sheet beam in the above scenario was theoretically analyzed to evaluate the focusing conditions. A practical magnetic field system was then designed based on the offset-pole-piece PCM scheme with the shortened pole pieces, which can meet the focusing requirements, especially on the side focusing. The theoretical analysis and the modified PCM scheme lead to a significant improvement in the focusing/transmission of the sheet beam. The 3-D particle simulation showed that a stable long-distance transmission over 100 mm can be achieved with the two-plane PCM focusing where an elliptical-cross section sheet beam is assumed with dimensions of 0.6 mm ×0.11 mm, voltage of 24.5 kV, and current of 0.18 A.