Three-Dimensional Printing of Honeycomb Microwave Absorbers: Feasibility and Innovative Multiscale Topologies

In this article, we propose to apply 3-D printing technology to the design and realization of honeycomb microwave absorbers. First, printability of simple honeycomb structures, made of a lossy dielectric material, was evaluated and validated by measurement in the 2-18 GHz frequency band. Effective dielectric properties of honeycomb structures with different dimensions are also discussed. Then, the interest of 3-D printing technology was highlighted by the design, fabrication, and measurement of a multiscale honeycomb absorber that can significantly increase the relative bandwidth. The 3-D printed honeycomb absorbers are compared with others technologies. The potential of this technology was also illustrated by the fabrication and measurement of a pyramidal honeycomb absorber that demonstrates an absorption level of more than 22.9 dB over the 2-18 GHz frequency band.