Next Generation Air Quality Management using Pollution Detection and Purification Compartment

Air pollution is caused by the presence of the excessive amount of harmful substances that are mixed in the atmospheric air. Air pollution is found as a dangerous substance on the environment that leads to spoil in atmosphere. Pollution in Delhi, particularly during in winter season that crosses almost 40 times the limit given by World Health Organization (WHO). The major particle in air Pollution is caused by untreated dust particles which may in turn results in serious health problems. A study states that by collecting the dust from different regions helps us to understand the nature of dust and its harmful effects may help us to control them by the purification process. . In this work, we will detect impurities on air based on design of alpha sensor. The sensor may be connected up to an Arduino board equipped with software to analyze air quality. USB may be used to store and retrieve the impurity variation. Air quality may be remotely monitored for changes using the IoT. As long as Particulate Matter (PM) emissions are higher than allowed, the filter device may be activated to clean the air. Electronics and mechanical backup must be included into the air purification chamber's integrated design. Particulate matter (PM) in the air must be measured using a quality sensor, and then removed using a device built on the basis of the suggested approach. The proposal of idea is followed by prototype making which is tested out in the real world for efficiency and feasibility.