Automatic Refinery System Framework for Industries; Power Generation System Perspective

The lack of chemical-free water is a problem that plagues many areas of the world today. Approximately 884 million people suffer each day from insufficient quantities of clean water. The use of chemical processing mechanisms for purification is an affordable solution. The plan is to construct a water filtration system with an integrated power system that can utilize its own energy while remaining low-cost and sustainable. The system will accept chemically mixed water here, passing through a reservoir and then being treated by a refiner. With the aid of this apparatus, neutralized chemical water from chemically mixed water was prepared from industrial water waste. When the water pressure reaches its maximum, the water detector will send a signal to open the gate as it needs to run the turbine at full speed with high pressure to generate electricity using the generator, charge a battery with the help of the charge controller, and provide a small amount of electricity for industrial uses. This rechargeable battery will supply energy to pH level detectors, water level indicators, and automatic gates. Here, two types of solutions will be stored in the reservoir: one will be an acidic solution, and the other will be an alkaline solution. This solution is used to neutralize the water according to the pH level of the refinery reservoir solution. The remaining chemical-free water will be discharged into the nearest dumping zone.