The Smart Analysis of Hydropower Energy Measurement in Power Plants using Industrial Machine Learning Model

A small hole is made before fitting and to help identify it. A tool used for drilling holes in concrete walls, brick walls etc. It is named 8SWG 6SWG according to the thickness of the chisel. Its handle is made of iron and after plugging this nut into a small hole on one side of the tool, hit the other end with a hammer. This tool is used to drill holes in the wall to carry the wires from one side to the other. On one side the teeth are cut and sharp and saw-like. The other end should be hammered. While beating, the pipe should be rotated with the hands holding it. Wooden boxes, frames, round blocks, (Round Block) are used to arrange them, cut them as required. Can be used to cut pipes, metal sheets etc. Its output is made of iron. The handle is made of wood. The length of the beam can be increased or decreased to adjust the length of the iron sword. It is so called because the lye part is ball-like. Its handle is made of wood and the other part is made of iron. This hammer is used to drive nails and bend wire pipes. Its other end is flat. It is usually named by its weight. Used in various weights from 0.5 kg. It is a tool with a sharp tip. Its handle is made of wood.