Novel Detection of Water Quality Based on pH Level Data Obtained from Water Sources Using Node MCU

Aim: The main objective of the system is to detect the novel detection of water quality based on pH level data obtained from water source using node MCV with pH sensor. The drinking water pH value is 6.5 to 8.5 from the World Health Organization (WHO). Materials and Method: A total of 20 samples are taken from the water Monitor system. Group1 consists of Node mcu pH values
$(\mathrm{n}=10)$
and group2 consists of Arduino pH values
$(\mathrm{n}=10)$
. The unpaired T-test was done for the samples, maximum power is 0.8 and the error correction was taken as 0.5. The sigma value using pH is 0.0387. The G power is 0.8. Results: By using pH sensors to detect water, a water monitoring system can be implemented. The reaction time of the system towards water environmental monitoring was likely to be enhanced. The implementation of a water quality detection system helps in monitoring water pollution. The overall sigma of the system is 0.0387 and accuracy is likely to be obtained as 94.74%. 0.03 is the significance value
$(\mathrm{P} <$
0.05).Conclusion:This novel method seems to be more accurate in finding environmental monitoring of water quality.