Improved Decoupling for Low Frequency MRI Arrays Using Non-Conventional Preamplifier Impedance

Objective
: In this study, we describe a method to improve preamplifier decoupling in low frequency MRI receive coil arrays, where sample loading is low and coils exhibit a high Q-factor.
Methods
: The method relies on the higher decoupling obtained when coils are matched to an impedance higher than 50 Ω. Preamplifiers with inductive and low resistive input impedance further increase the effectiveness of the method.
Results
: We show that for coils with poor sample loading, coupling to other elements in an array is a major source of SNR degradation due to a reduction in the coil Q-factor. An eight-channel
¹³
C array at 32 MHz for imaging the human head has been designed following this strategy. The improved decoupling even allowed the construction of the array without the overlapping of neighboring coils. Parallel imaging performance is also evaluated, demonstrating better spatial encoding of the array due to its non-overlapped geometry.
Conclusion
: The proposed design strategy for coil arrays is beneficial for low frequency coils where the coil thermal noise is dominant. The method has been demonstrated on an eight-channel array for the human head for
¹³
C MRI at 3 T (32 MHz), with almost twofold SNR enhancement when compared with a traditional array of similar size and number of elements.
Significance:
The proposed method is of relevance for low frequency arrays, where sample loading is low and noise correlation is high due to insufficient coil decoupling.