High speed digital CMOS divide-by-N fequency divider

A high-speed scalable programmable divide-by-N frequency divider is presented. The divider includes a new proposed state look-ahead parallel counter with a basic conventional D-type Flip-Flop (DFF) circuit. The counter is structured from two modules of 2-bit counter stages separated by DFF buffers, where all are triggered at the edge of the input clock. The reload circuit is a single DFF buffer, while the detecting count circuit is constructed from a two level decoder. The M-bit divider critical path delay, which is independent of technology, is approximated to [3.5 + Log4 (M)] of a unit delay close to a 2-input NAND gate. This results in a measured frequency, which slightly drops to about 6% against the increase of the divider bit size. Furthermore, the divider circuit is attractive for continued technology scaling since the architecture is based on using identical modules of small count of CMOS transistors with only threshold voltage technology limitations. The measure rate of the number of transistors is approximated to a linear increase of about 17% per a two-bit increase of the divider size. The presented 8-bit programmable divide-by-N frequency divider is capable of operating up to 2 GHz for a 1.35V power supply voltage with a maximum power consumption of 16.78mW and a maximum frequency divider factor of N=256 using the TSMC 0.15 μm digital CMOS process, and gives a measured area of 95*143μm
²
with a total count of 508 transistors.