A PCI-express Gen2 transceiver with adaptive 2-Tap DFE for up to 12-meter external cabling

The most updated specification of PCI-Express External Cabling 1.0 only specifies Gen1 (2.5Gbps) for short-reach usage. This proposed transceiver architecture not only increases the link rate from Gen1 to Gen2 (5Gbps), but also extends link range from short-reach to long-reach using a 12-meter 26AWG cable. The S
21
of such a cable is ‒20dB at 2.5GHz. The new receiver achieves jitter tolerance at the far-end terminal followed by such a cable is 0.76UI, with a random jitter of 0.31UI, under the BER of 10
^‒12
. This design has been fabricated in TSMC 80nm CMOS process, with the die area of 0.4mm
²
for each lane.