Motor parameter variation in vector controlled induction motor

The aim of this paper is to compare the influence of parameter uncertainties on the performance of two vector oriented control schemes of an electrical drive with an induction motor. In the first one the field oriented control method is used to control the speed of induction motor. In this system the spatial vector of the stator current is transformed into an i/sub 1q/ component which creates the torque, and into an i/sub 1d/ component which creates the flux. If the d-axis component of the stator current is of constant value, the motor drives with a constant flux and the torque can be altered rapidly by means of the q-axis component of the stator current i/sub 1q/. Two components U/sub 1d/, U/sub 1q/ of stator voltages in d-q coordinate system which must be applied to the stator d-q equivalent windings, are generated by two PI regulators controlling the two components: flux-generating and torque generating stator current. In the second one the stator flux oriented control method is used to control the torque of induction motor. By using instantaneous voltage space vectors with selection of the optimum inverter switching modes employing vector modulation technique, the direct control of torque and stator flux is achieved.